Filter
Top Products
Removal and Installation
8-67
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Pinch-Arm Mechanism
Removal
WARNING Switch off the printer and remove the power cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Back Platen (make sure
the Pinch-Arm Lever is in the UP
Position) - Refer to Page 8-17.
2. Remove ALL the Pinch-Arms - Refer
to Page 8-66.
3. Remove 1 T-15 screw (Type E) that
attaches the Cam to the Lever.
4. Remove 1 T-15 screw from the left
hand side of the Cam.