Filter
Top Products
System Error Codes
2-5
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Error Log Utility
The Error Log utility contains a record of the last 10 system error
codes the Printer has experienced. The purpose of this information
is to:
Determine whether the Printer is experiencing repetitive failures.
Determine whether the previous problems are causing the current
failure in the printer.
Determine whether there are additional symptoms to the current
system error code.
The information that is stored for each error code is:
The reported System error code.
The code line in the Firmware where the error was triggered.
The date when the error code was triggered.
Accessing the Error Log Utility
1 Press the ↑ or ↓ key until the front panel displays the Setup Menu and
then press Enter
.
2 Press the ↑ or ↓ key until the front panel highlights Log. Press the
Enter key.
Menu
Back
Enter
Press ENTER for
Set-up menu
Set-up menu
Menu
Back
Enter
Set-up menu
Expansion cards
I/O set-up
front panel
Altitude = 0-1000 m.
Log