Filter
Top Products
Service Calibrations
5-13
HP DesignJets 500, 510 and 800 Series Printers Service Manual
7 Re-enter the Advance Calibration and select "Measure pattern" and
press Enter.
8 The Printer will measure the alignment marks using the line sensor
on the Carriage Assembly. The following message will be displayed
while the Printer measures the pattern:
9 Once the calibration is completed, the following message will be
displayed:
Menu
Back
Enter
Factory advance cal.
Measure pattern
Create pattern
Calibrating
Job management menu
Calibration finished
successfully.
Press ENTER to continue
Menu
Back
Enter