Removal and Installation
8-15
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Right End Roll-Feed
Removal
WARNING Switch off the printer and remove the power cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Right Hand Cover - Refer
to Page 8-7.
2. Remove the Spindle.
3. Remove 1 T-20 screw (Type F) from
the Right Hand Roll-Feed.
4. Remove 2 T-20 screws (Type F) from
the Right Hand Roll-Feed (located on
the inside).