Filter
Top Products
Removal and Installation
8-66
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Pinch-Arm
Removal
WARNING Switch off the printer and remove the power cord.
NOTE Refer to the table on Page 8-4 for information on screw types.
1. Remove the Spindle.
2. Remove the Back Platen (make sure
the Pinch-Arm Lever is in the UP
Position) - Refer to Page 8-17.
3. Remove 2 T-20 screws (Type H) from
each Pinch-Arm.
NOTE
There 5 Pinch-Arms in the
42" Model and 3 in the 24"
Model.
4. Remove the Pinch-Arm(s).