Removal and Installation
8-35
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Cutter Bushing
Removal
WARNING Switch off the printer and remove the power cord.
1. Remove the Left Hand Cover - Refer
to Page 8-5.
2. Remove the Electronics Module -
Refer to Page 8-24.
3. Remove the Cutter Assembly - Refer
to Page 8-32.
4. Remove the Left Encoder Holder -
Refer to Page 8-33.
5. Slide the Cutter Bushing to the Left
and remove from the Printer.