Filter
Top Products
Removal and Installation
8-84
HP DesignJets 500, 510 and 800 Series Printers Service Manual
Paper-Axis Motor
Removal
WARNING Switch off the printer and remove the power cord.
1. Remove the Spindle.
2. Remove the Left Hand Cover - Refer
to Page 8-5.
3. Remove the Back Platen (make sure
the Lever is in the UP position) -
Refer to Page 8-17.
4. Disconnect the Paper-Axis Motor
Cables from the Electronics Module.
5. Remove 2 T-15 screws (Type J) from
the Paper-Axis Motor.
NOTE Make sure that you keep hold
of the Paper-Axis Motor
when removing the screws,
otherwise the Motor could
fall and be damaged.