HP (Hewlett-Packard) DesignJet 2500 Printer User Manual


 
Table of Contents
viii
Comparing Color Output between Imaging and UV Ink Systems 9-3
Performing a Image Quality Test 9-4
Servicing the Printheads 9-5
Aligning Printheads 9-5
Refilling Printheads 9-5
Checking Printheads 9-6
Media Test Print 9-7
How to perform the Media Test Print 9-8
Changing the Print Quality when Media is Already Loaded 9-10
Maintaining Your Printer 10-1
Cleaning the Printer 10-2
Cleaning the Printer Exterior and Inside the Doors 10-2
Lens Maintenance 10-3
Replacing the Lens Cover 10-4
Normal Printer Use 10-6
Storing and Moving Your Printer 10-7
Selecting Transport Mode 10-7
Removing the Printheads 10-8
Removing the Printhead Cleaners 10-9
Removing the Ink Cartridges 10-11
Switching off and Disconnecting the Printer 10-13
Troubleshooting 11-1
A Note About Troubleshooting 11-2
Where to Find Help in Solving Problems 11-3
Finding the Source of Your Problem 11-4
Solving Image-Quality Problems 11-5
How to Proceed with the Image Quality Print Diagnosis 11-5
If the Color is Not as Expected 11-6
Some General Information About the Image Quality Test 11-7
Identifying the Printhead Components 11-7
How to Use the Image Quality Print 11-8
Printing the Image Quality Print 11-8
Analyzing the Image Quality Test Results 11-10
Solving the Problems 11-11
No Printing Defects Found in the Image Quality Print 11-22
Solving Color Accuracy problems 11-23
Color Consistency problems 11-23