Filter
Top Products
Controlling Image Quality
Servicing the Printheads
9-10
Changing the Print Quality when Media is Already Loaded
If, after loading and selecting a print mode for non-endorsed media, you want to
change the print mode to another one, it is not necessary to remove and reload the
media.
From the front panel menu select
Image quality/Qualify media/Select media and press
Enter. By scrolling using the
↑
or
↓
keys you will see the following print mode
selections:
NOTE:These print mode selections are only available when media is loaded and the
printer has completed its initialization procedure.
While scrolling through the display you will see a
* displayed next to one of the
media types, this shows the current media selected in the printer. It is also an
alternative way of confirming which media is currently loaded.
By pressing Enter when the desired selection is displayed, you can change the print
mode to the one displayed on the front panel.
IMPORTANT If you are printing on HP endorsed media, always select the same media print mode
as the media loaded in the printer. Hewlett-Packard has tested these settings for
optimum performance and print quality.
HP DesignJet CP Ink System UV
(UV Pigmented Ink) Installed
HP DesignJet CP Ink System
(Imaging Ink) Installed
UV Opaque vinyl Coated paper
Heavy coated Heavy coated
UV Custom media A High-gloss photo
UV Custom media B Semi-gloss photo
UV Custom media C Imaging film-backlit
UV Custom media D Opaque vinyl
Image Quality
Qualify media
Select Media