Filter
Top Products
Front-Panel Messages
Message Explanations and Actions
12-2
Message Explanations and Actions
This is a list of the messages in the front-panel display. If an action is needed, it is
shown in italics in the Explanation and Action column. The messages are listed in
alphabetical order.
Message Explanation and Action
Accessing head
cleaners
The printer is moving the platform that contains the printhead cleaners to a place
where you can access them.
Wait for a few seconds until this operation has finished.
Accessing
printheads
The printer is moving the carriage that contains the printheads to a place where you
can access them.
Wait for a few seconds until this operation has finished.
Action unavailable
Entry being printed
A print is being printed and you have requested to move, delete or modify the number
of copies through the queue management menu. You cannot change the current entry
until the print has finished.
Wait until the print has finished.
Calibrate error
Continue→
The calibration print was loaded incorrectly and it could not be measured.
Press ↓ to continue, then reload the print for measurement. Follow front panel
instructions.
Calibrate Yes →
Color No →
You are using sheet media and color calibration is on. The printer is asking you if you
want to calibrate the color for the loaded media.
Press
↑ for yes.
Press ↓ for no.
Calibration done
Continue→
Accuracy calibration is complete.
Press ↓ to continue.
Cancelled
Continue→
You have just cancelled the last print or function.
Press ↓ to continue.
Check ■■*■
Close right door
The printer has detected an error in the printhead cleaners indicated by the stars.
Reseat (do not replace) the indicated cleaners. When you have done so, close the right
door of the printer. See 11-39, Checking the Printhead Cleaners.