Filter
Top Products
Reconfiguring Your Printer
Turning on the Take Up Reel
8-12
Turning on the Take Up Reel
The Take Up Reel enables you to have very long prints without the need for you to
be present. As the media is printed, it is automatically wound onto the Take Up Reel
spindle.
NOTE:The default for the Take Up Reel is On.
1 When the Front Panel displays Ready press Enter.
NOTE:If the front panel does not display Ready press the Previous key until it does.
2 Use the
↑
or
↓
keys until the front panel displays Device Setup. Then press the
Enter key.
3 Use the
↑
or
↓
key until the display shows:
4 Use the
↑
or
↓
key until the display shows ON. Then press Enter to turn the Take
Up Reel on.
NOTE:When the Take Up Reel is turned on:
■
The cutter is turned off and will only work if the Form Feed and Cut button is
C4704030
Device Setup
Previous
Enter
C4704034
Take Up Reel =Off
C4704034
Take Up Reel=On