Filter
Top Products
Controlling the Page Format
Page Size and Accuracy
5-8
Page Size and Accuracy
The printer dynamically modifies the advance of the media, to achieve the best
image print, depending on the printheads installed in the printer and the content of
the image, although the width of the image will always be correct. In the front panel
display the
“Page accuracy” option lets you choose one of three options.
* Also refer to the explanation given below and Accuracy (Maximum accumulated
error) on page 13-3, Accuracy selection.
1 From the front panel, scroll through the menus and choose
“Device setup”. Press
Enter to access this menu. If you are unable to find this menu make sure that the
Full Menu Mode is enabled, see page 2-16, Selecting the Full Menu Mode.
2 Once you are selected
“Device setup” scroll through the menu until you find “Page
Accuracy”
. Press Enter to access this menu.
3 You will now have three different options. The default setting is
“Optimized”.
Accuracy*
Selection
Page Length
Optimized
Image Quality
Optimized
“Optimized” No Yes
“Constant” No No
“Maximum” Yes No
DEVICE SETUP
Pg.Acc=Optimized
Full menu mode
Default: Optimized*
C4704034
FULL MENUS
Device setup
→
C4704034
Device setup
Pg. Accur.=optimized
→
C4704034
Page Accuracy
Optimized*