HP (Hewlett-Packard) DesignJet 2500 Printer User Manual


 
Front-Panel Messages
Message Explanations and Actions
12-9
Mispositioned
Reload sheet
The sheet media is mispositioned.
Remove and reload the sheet.
MISSING INK
SYSTEM
Install
One or more ink systems are missing.
Press
or the Replace Ink System key to install the ink systems in order to print with
your printer.
Mixed ink system
❏■■■
At power-on or after the ink systems have been serviced, the printer has detected
components of different ink system types (for example, Imaging and UV Pigmented).
Printing will be disabled until the ink systems are all of the same type. The flashing
squares indicate which ink systems need checking. The error may be because
the
printhead, printhead cleaner and ink cartridge within an ink system are not all of
the same type (UV Pigmented or Imaging) or that entire ink systems are of
different types.
Press to continue, to check the ink systems. See 11-38, Checking Ink Systems.
MIXED INK
SYSTEM
88xxxx
The printer has earlier detected components of different ink system types (for
example, Imaging and UV Pigmented). Printing will be disabled until the ink systems
are all of the same type. The error code “88xxxx” indicates a mixed ink system error.
Press the Replace Ink System key to replace the erroneous ink systems in order to
print with your printer again.
You can press the Enter key to access the main front-
panel menu.
See 11-38, Checking Ink Systems.
No code for UV
inks
Continue
The printer does not have the correct firmware for the HP DesignJet CP ink system
UV currently installed.
(This message only applies to firmware revision levels
A.01.xx.)
Press to continue, and reinstall the HP DesignJet CP Ink System (Imaging ink
system) back into the printer.
Access the menu Utilities / Statistics / Code rev to confirm the firmware revision
present. If you have a code revision like A.01.xx, you need to upgrade your firmware to
code revision A.02.08 or higher to use the HP DesignJet CP Ink System UV.
Open left door to
access ink cartrg.
You are doing an ink system replacement.
Open the left door to access the ink cartridges.
Open right door to
access head cleaners
You are doing an ink system replacement.
Open the right door to access the printhead cleaners.
Message Explanation and Action