Filter
Top Products
13
Chapter 1, Getting Started
Introduction
Required
Equipment
Figure 1
You must supply:
Means to control
base station and
read FER.
CDMA PCS
Base Station.
Cables to connect the base
station to the Test System.
(See table below.)
HP 83236A, B
Cable Kit
(Supplied with the
HP 83236A,B)
Supplied with the Test System:
HP 8921A Opt. 600,
601, 603 or an
HP 8921A with an
HP 83203B or 83205A
Cellular Adapter.
HP 83236A, B
PCS Interface
CDMA PCS Base
Station Test Software
(Supplied with the
HP 83236A, B)
Cable Kit
Connector at System end
Connections
Item
1
2
3
4
N (m)
N (m)
BNC (m)
BNC (m)
Connects base station’s transmitter test port to PCS Interface’s RF IN/OUT port.
Connects PCS interface’s RF IN/OUT port to base station’s receiver test port.
Connects Even-Second clock from BS to EVEN SEC/SYNC port on Cellular Adapter.
Connects BS Timebase reference to timebase input on the Cellular Adapter.
HP 83236B System
Utility Software
Label: