Filter
Top Products
37
Chapter 2, Making Measurements
Transmit Spectrum
Steps: Go to
Spectrum Analyzer
@ Present Chan
1 Connect the equipment as shown in figure 16.
2 In the main menu, enter the Base Station Channel number for the transmitter
being tested.
3 Turn on your base station transmitter.
4 Scroll to and select Go to Spectrum Analyzer @ Present Chan. The
spectrum analyzer display will appear and the center frequency will be set to match the
channel number entered in step 2 (see figure 17).
5 Use the Controls area (set to Main) in the lower part of the spectrum analyzer
screen to make changes to the reference level and span settings as desired. Set the
Controls field to Marker to use marker functions.
6 To return to the main menu press SHIFT, then k1, then ENTER.
Figure 17
Note that the Marker
Frequency readout is
corrected to read the
actual PCS frequency.