Filter
Top Products
64
Chapter 4, Troubleshooting
Overview
Overview
Use table 2 to locate your problem or a received error message, then refer to the
page number shown.
Problem or error message Refer to:
Loading and running the software
Memory overflow errors "Memory Overflow Errors" on page 65
Message: HP-IB Command not accepted. Option not
installed.
"Test System Configuration Errors at
Runtime" on page 66
Message: Verify PCS Interface is connected and on. Retry?
Message: Compensation not performed. Check DUPLEX
OUT cable. Retry?
"Other Test System Configuration
Errors" on page 67
Configuration Information is not updated "Configuration Information is Not
Updated as Saved" on page 67
The menu screens you see do not match those in this book "Menu Screens in this Book do not
Match the Screens that You See" on page
68
Measurements
Message: Cannot correlate to input signal. Check setup. "CDMA Measurement not Correlating"
on page 69
Unable to read frame error rate (FER) or unexpectedly high
readings (receiver tests)
"Frame Error Rate (Receiver
Measurements)" on page 71
Questionable Measurement Results
Average power "Average Power" on page 73
Modulation quality (rho) "Rho Measurements" on page 74
Code domain power, timing, or phase "Code Domain Measurements" on page
74
Receiver tests "Receiver Tests" on page 74
Table 2