Filter
Top Products
55
Chapter 3, Operating Overview
Loading Configuration Information from Memory
Loading Configuration Information from Memory
The information about your setup and base station entered into the
Configuration Information Menu can be saved in memory. This data is
loaded automatically when you re-run the Software. You can also load the data
manually. This procedure describes steps for manually loading the data.
Requirements • Data previously saved to a RAM disk.
Steps 1 From the main menu, choose the Configuration Information Menu.
2 Scroll down to Load Info From Memory and press the knob. The loading process
takes only a fraction of a second. You should see your saved values in the
Configuration Information Menu.
3 To return to the main menu level, press the Main Menu (k5) key.
Notes See "Saving Configuration Information to Memory" on page 54 for a description
of saving the settings to memory.