Filter
Top Products
59
Chapter 3, Operating Overview
Setting the Test System “Beep”
Setting the Test System “Beep”
The Software can provide an audio tone (beep) to let you know when selections
are made in the menu screens. This beep sounds when you change menu screens,
choose an entry field, and when you complete an entry.
In its default mode, the beep function is set to a medium volume (Quiet). You can
customize the beep function as follows:
• If you don’t want to hear the beep at all, you can turn it off.
• For noisy environments, you can set the beep to a high volume (Loud).
Steps 1 From the main menu, select Configuration Information Menu.
2 Scroll to and select Beep.
3 Use the cursor to scroll and choose one of the three options (Off, Quiet, or Loud).
4 Press the Main Menu (k5) key to return to the main menu level.
Notes The beep level you set will not be saved unless you use the Save Info to
Memory
feature. See "Saving Configuration Information to Memory" on page 54 .