Filter
Top Products
14
Chapter 1, Getting Started
Step 1: Make Connections
Step 1: Make Connections
Make the connections between the elements of the Test System and the base
station as shown in figure 2.
NOTE: This figure does not illustrate all rear-panel connections between the Cellular Adapter and
Test Set. Refer to the Cellular Adapter User’s Guide to verify these connections.
Figure 2
SYNTH REF IN
10 MHz OUT
EVEN SECOND/
SYNC IN
10 MHz REF INPUT
10 MHz REF OUTPUT
REF IN
19.6608 MHz Clk
(or other reference)
CDMA Base Station
Even-Second
Clock
This figure shows the
most common
timebase configuration.
See "An Alternative
Test-System-to-Base-
Station Timebase
Configuration" on page
60.
Note:
HP - IB