Filter
Top Products
HP 8517B S-Parameter Test Set Manual
1-1
1
Getting Started
This is the operating and service manual for the HP 8517B S-parameter test
set. It is to be used in conjunction with the HP 8510C Network Analyzer
Operating and Service Manual. Together, these manuals provide
information needed to configure the system and make measurements.
How to Use This Manual
Step 1. Review Chapter 1, “Getting Started” and Chapter 2, “Installation” of this manual to
learn about:
• Using this test set
• Using options of the test set
• Preparing the site for operation
• Understanding safety considerations
• Unpacking the instrument and checking it for shipment damages
• Configuring the HP 8517B test set with the HP 8510C Network Analyzer
Step 2. Insert the contents of this manual into the HP 8510C Test Sets and Accessories
binder behind the tab labeled “Test Sets.”
Step 3. Review the
Connector Care Quick Reference Card
(HP part number 08510-90360)
supplied with the HP 8510C manuals set.
Refer to the calibration kit documentation for complete information about care,
cleaning, gaging, and connecting precision devices. Knowledge and application of
proper connector care is essential to achieving good connections and maintaining
maximum performance quality with your precision calibration devices.
Step 4. Read Chapter 3, “Operation,” to learn about test set front- and rear-panel features.
This chapter also has information about controlling multiple test sets, measuring
high power devices, using the anti-rotation clamps on the cables, and connecting
devices to the test set.
Step 5. Refer to Chapters 4 through 7 for reference information about specifications,
troubleshooting, replacement procedures, and replacement parts information.