Filter
Top Products
ServerNet Resources: Monitoring and Recovery
HP Integrity NonStop NS-Series Operations Guide—529869-005
7-6
Monitoring the ServerNet Fabrics Using SCF
Monitoring the ServerNet Fabrics Using SCF
The SCF STATUS SERVERNET command displays a matrix for the ServerNet X
fabric and a matrix for the ServerNet Y fabric. Each matrix shows the status of the
paths between all pairs of processors.
Use the SCF STATUS SERVERNET command to display current information about
the ServerNet fabric. At a TACL prompt:
> SCF STATUS SERVERNET $ZSNET
In the preceding example of a 2-processor system:
•
All ServerNet connections between processors 0 and 1 are up.
•
Processors 2 through 15 do not exist on this system. As a result:
°
The status from processors 0 and 1 to processors 2 through 15 is displayed as
unavailable (UNA) in both fabrics.
°
The status from proce ssors 2 through 15 is displayed as down.
1-> status servernet $zsnet
NONSTOP KERNEL - Status SERVERNET
X-FABRIC
TO 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
FROM
00 UP UP UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA
01 UP UP UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA
02 <- DOWN
03 <- DOWN
04 <- DOWN
05 <- DOWN
06 <- DOWN
07 <- DOWN
08 <- DOWN
09 <- DOWN
10 <- DOWN
11 <- DOWN
12 <- DOWN
13 <- DOWN
14 <- DOWN
15 <- DOWN
Y-FABRIC
TO 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
FROM
00 UP UP UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA
01 UP UP UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA UNA
02 <- DOWN
03 <- DOWN
04 <- DOWN
05 <- DOWN
06 <- DOWN
07 <- DOWN
08 <- DOWN
09 <- DOWN
10 <- DOWN
11 <- DOWN
12 <- DOWN
13 <- DOWN
14 <- DOWN
15 <- DOWN