Filter
Top Products
Creating Startup and Shutdown Files
HP Integrity NonStop NS-Series Operations Guide—529869-005
16-18
Printer Line Startup File
Printer Line Startup File
This example shows an SCF command file that starts a printer line associated with the
SWAN concentrator $ZZWAN.#S01 (configuration track-ID X001XX).
This file can be invoked automatically from the STRTSYS file, or you can invoke it by
using the following TACL command:
> SCF / IN $SYSTEM.STARTUP.STRTLP, OUT $ZHOME /
== This is $SYSTEM.STARTUP.STRTLP
== Starts the printer associated with the SWAN concentrator
== $ZZWAN.#S01
ALLOW 20 ERRORS
START LINE $LP5516
Expand-Over-IP Line Startup File
This example shows an SCF command file that starts an Expand-over-IP
communications line from $ZZLAN.LAN08, at IP address 192.231.36.094, to \Case2, a
NonStop K-series server at IP address 192.231.36.089.
This file can be invoked automatically from the STRTSYS file, or you can invoke it by
using the following TACL command:
> SCF / IN $SYSTEM.STARTUP.IP2CASE2, OUT $ZHOME /
Note that the IP addresses used in this file are examples only. If you use this example
file on your system, you must change these IP addresses to IP addresses that are
appropriate for your LAN environment.
== This is $SYSTEM.STARTUP.IP2CASE2
ALLOW 100 ERRORS
START LINE $Case2IP
Expand Direct-Connect Line Startup File
This example shows an SCF command file that starts an Expand direct-connect line on
a SWAN concentrator.
This file can be invoked automatically from the STRTSYS file, or you can invoke it by
using the following TACL command:
> SCF / IN $SYSTEM.STARTUP.STRTLH, OUT $ZHOME /
== This is $SYSTEM.STARTUP.STRTLH
START LINE $Case2elh