Filter
Top Products
Determining Your System Configuration
HP Integrity NonStop NS-Series Operations Guide—529869-005
2-16
Displaying Configuration Information—SCF
Examples
To display configuration attribute values for all the WAN subsystem configuration
managers, TCP/IP processes, and WANBoot processes:
-> INFO PROCESS $ZZWAN.*
The system displays a listing similar to that shown in Example 2-5:
To display detailed information about an Expand line-handler process:
->INFO LINE $line-name, DETAIL
where $line-name is the logical line-handler process name.
The system displays a listing similar to Example 2-6 for Expand-Over-NAM and
Expand-Over-ServerNet line-handler processes.
Example 2-5. SCF INFO PROCESS $ZZWAN Command Output
-> INFO PROCESS $ZZWAN.*
WAN MANAGER Detailed Info Process \DRP09.$ZZWAN.#ZTXAE
RecSize........... 0 *Type............. ( 0,49)
Preferred Cpu..... 0 Alternate Cpu..... 1
HOSTIP Address.... 172.031.145.090
*IOPOBJECT........ $SYSTEM.SYS00.SNMPTMUX
TCPIP Name........ $ZTC02
WAN MANAGER Detailed Info Process \DRP09.$ZZWAN.#0
RecSize........... 0 *Type............. (50,00)
Preferred Cpu..... 0 Alternate Cpu..... N/A
*IOPOBJECT........ $SYSTEM.SYS00.CONMGR
Example 2-6. SCF INFO LINE Command Output
-> INFO LINE $SC151, DETAIL
L2Protocol Net^Nam TimeFactor...... 1 *SpeedK........ NOT_SET
Framesize....... 132 -Rsize........... 1 -Speed........
*LinePriority.... 1 StartUp......... OFF Delay......... 0:00:00.10
*Rxwindow........ 7 *Timerbind... 0:01:00.00 *L2Timeout..... 0:00:01.00
*Txwindow........ 7 *Maxreconnects... 0 *AfterMaxRetries PASSIVE
*Timerreconnect 0:01:00.00 *Retryprobe...... 10 *Timerprobe.... 0:00:30.00
*Associatedev.... $ZZSCL *Associatesubdev *Timerinactivity 0:00:00.00
*ConnectType..... ACTIVEANDPASSIVE
*LineTf.......... 0