Filter
Top Products
Creating Startup and Shutdown Files
HP Integrity NonStop NS-Series Operations Guide—529869-005
16-8
Example CIIN Files
Example CIIN Files
This example CIIN file does not include a persistent CLCI TACL process.
Comment -- This is the initial command input (CIIN) file for the system.
Comment -- If CIIN is enabled in OSM and configured in your CONFTEXT
Comment -- file, the initial TACL process will read this file and
Comment -- then terminate.
Comment -- This file is used to reload the remaining processors and
Comment -- start a TACL process pair for the system console.
Comment -- Reload the remaining processors.
RELOAD /TERM $ZHOME, OUT $ZHOME/ *
Comment -- Start a TACL process pair for the system console TACL window.
Comment -- Use the OSM Low-Level Link to start a TTE session
Comment -- for the startup TACL before issuing this command (see the
Comment -- Start Terminal Emulator command under the File menu).
Comment -- These should be the last commands in this file, because
Comment -- the TACL process displays a prompt and attempts to read
Comment -- from $YMIOP.#CLCI, blocking other processes from writing to
Comment -- this device.
TACL/TERM $YMIOP.#CLCI, IN $YMIOP.#CLCI, OUT $YMIOP.#CLCI, NAME $SC0, &
PRI 199, CPU 0/1
TACL/TERM $YMIOP.#CLCI, IN $YMIOP.#CLCI, OUT $YMIOP.#CLCI, NAME $SC0, &
PRI 199, CPU 1/0
Comment -- Upon completion of this file, the initial TACL process
Comment -- terminates. You need to log on to a new TACL session
Comment -- to complete the remainder of the system startup process.
This example CIIN file shows what you would use if you had created a persistent CLCI
TACL process by configuring it as a generic process.
Comment -- This is the initial command input (CIIN) file for the system.
Comment -- If CIIN is enabled in OSM and configured in your CONFTEXT
Comment -- file, the initial TACL process will read this file and
Comment -- then terminate.
Comment -- This file is used to reload the remaining processors and
Comment -- start a TACL process pair for the system console.
Comment -- Reload the remaining processors.
RELOAD /TERM $ZHOME, OUT $ZHOME/ *
Comment -- Use SCF to start a persistent TACL process pair for the
Comment -- system console TACL window.
Comment -- Use the OSM Low-Level Link to start a TTE session
Comment -- for the startup TACL before issuing this command (see the
Comment -- Start Terminal Emulator command under the File menu). This SCF
Comment -- command must be the last command in this file, because the TACL
Comment -- process creates displays a prompt and attempts to read from
Comment -- $YMIOP.#CLCI, blocking other processes from writing to this
Comment -- device.
SCF /NOWAIT, OUT/ START PROCESS $ZZKRN.#CLCI-TACL
Caution. If you use the following example as is, you must first create the $ZZKRN.#CLCI-
TACL process. If you do not create the $ZZKRN.#CLCI-TACL process first, you might have no
access to the system after it loads. To recover, load the system again from another SYSnn or
with CIIN disabled.