Filter
Top Products
Determining Your System Configuration
HP Integrity NonStop NS-Series Operations Guide—529869-005
2-13
Additional Subsystems Controlled by SCF
Examples of the INFO command used with the OBEYFORM option are:
-> INFO ADAPTER $*, OBEYFORM
-> INFO LIF $*, OBEYFORM
WAN Subsystem
Before using commands listed in Table 2-6, type this command to make the wide area
network (WAN) subsystem the default object:
> SCF ASSUME PROCESS $ZZWAN
The WAN subsystem has responsibility for all WAN connections.
Additional Subsystems Controlled by SCF
Table 2-7 lists the names associated with additional subsystems that can be controlled
by SCF, along with its device types. You can use SCF commands to display the
current attribute values for these objects.
Some SCF commands are available only to some subsystems. The objects that each
command affects and the attributes of those objects are subsystem specific. This
subsystem-specific information is presented in a separate manual for each subsystem.
A partial list of these manuals appears in Table 6-1 on page 6-13.
Refer to the SCF Reference Manual for H-Series RVUs for further information.
Table 2-6. Displaying Information for the WAN Subsystem ($ZZWAN)
To Display Information About These
Configured Objects Enter This Command
The WAN subsystem manager LISTDEV WAN
All WAN configuration managers, TCP/IP
processes, and WANBoot processes
INFO *
All PATH names INFO PATH *
The WAN adapters INFO ADAPTER *
All DEVICE objects INFO DEVICE *
All PROFILE objects INFO PROFILE *
Table 2-7. Subsystem Objects Controlled by SCF (page 1 of 2)
Subsystem
Acronym Description
Device
Type
Device
Subtype
AM3270 AM3270 Access Method 60 0 or 10
ATM Asynchronous Transfer Mode (ATM)
protocol
42 0 or 1
ATP6100 Asynchronous Terminal Process 6100 53 0