Filter
Top Products
Communications Subsystems: Monitoring and
Recovery
HP Integrity NonStop NS-Series Operations Guide—529869-005
6-12
Tracing a Communications Line
The system displays a listing similar to this output. The NEIGHBOR field displays the
system to which a given line connects, and the STATUS field indicates whether the line
is up:
Tracing a Communications Line
Use the SCF TRACE command to trace the operation of a communications line. The
line continues normal operation while being traced, but it passes all its message traffic
to a trace procedure. Tracing enables you to see the history of a communications line,
including its internal processing.
You can display trace files by using the commands available in the PTrace program.
For information about PTrace, refer to the PTrace Reference Manual. For information
about configuring a trace by using the SCF TRACE command, refer to the
configuration and management manual for the communications subsystem you want to
trace.
1-> INFO PROCESS $NCP, LINESET
EXPAND Info PROCESS $NCP , LINESET
LINESETS AT \COMM (116) #LINESETS=35 TIME: JUL 9,2001 19:28:04
LINESET NEIGHBOR LDEV TF PID LINE LDEV STATUS FileErr#
1 \CYCLONE (206) 363 200K ( 0, 287)
1 363 READY
2 \SNAX (118) 353 200K ( 5, 333)
1 353 READY
3 \TESS (194) 554 200K ( 8, 279)
1 554 READY
4 \TSII (099) 556 200K ( 2, 265)
1 556 READY
5 \ESP (163) 365 200K ( 1, 274)
1 365 READY
6 \SVLDEV (077) 538 200K ( 7, 265)
1 538 READY
.
.
.
27 \SIERRA (012) 183 10K ( 4, 290)
1 183 READY
28 \PRUNE (175) 677 200K ( 5, 334)
1 677 READY
29 \OPMAN (252) 276 790K ( 5, 294) NPT
1 276 READY
30 \SOCIAL (045) 165 790K ( 8, 280)
1 165 READY
31 \NCCORP2 (080) 295 790K ( 8, 264)
1 295 READY
32 \CS8 (152) 323 -- -- -----
1 323 NOT READY (124)
33 \CORE (241) 324 -- -- -----
1 324 NOT READY (124)
34 \SUNTEC (062) 367 790K ( 5, 293) NPT
1 367 READY
35 \CS8 (152) 368 -- -- -----
1 368 NOT READY (124)