Filter
Top Products
Specifications and Regulatory Information
Hardware and Software Specifications
136 Corporate Evaluator’s Guide
Mode When IR port is enabled, sets the
hardware to support SIR (Standard IR)
or FIR (Fast IR) infrared
communications.
FIR
Base I/O address When IR port is enabled, sets the I/O
address and interrupt.
2F8 IRQ3
DMA channel When FIR mode is enabled, sets the
DMA channel.
DMA 0
Parallel Port Sets how the parallel port is
configured—by the user (Enabled),
automatically (Auto), or inactive
(Disabled).
Enabled
Mode When parallel port is enabled, sets the
port to Normal, Bi-directional, ECP, or
EPP mode.
ECP
Base I/O address When EPP mode is not enabled, sets
the I/O address.
378
Interrupt Sets the interrupt. IRQ 7
DMA channel When ECP mode is enabled, sets the
DMA channel.
DMA 3
LCD Status Panel
Display
Enables or disables display of the
status panel.
Enabled
LCD Status Panel
Date Format
Set date format on the status panel. mm/dd/yy
(month/date/year)
LCD Status Panel
Time Format
Set time format on the status panel. hh:mm
(24-hour format)
Security Menu Default
User Password Is Shows if a user password is set. Clear
Supervisor Password
Is
Shows if an supervisor password is set. Clear