or workstation connected to the IP network. This SNMP Manager program and its
vehicle are option to GR2000 and to be prepared by the user.
Other than the IP network connectivity and the hardware requirements specified
the software, the personal computer or workstation for SNMP Manager has no
particular requirement.
SNMP Manager, on the other hand, has certain requirements, recommendations,
and restrictions as shown below.
SNMP Manager version requirements: The router supports SNMPv1 (RFC115
To perform network management using SNMP manager, use SNMPv1.
Recommended product: Functionality of the following SNMP manager program
is proven on this router and hence recommended. If you use any other SNMP
manager program, check out its functionality before use.
SNMP Manager
HP OpenView Network Node Manager Ver4.0x (HP-UX version)
HP OpenView Network Node Manager Ver5.01 (HP-UX version)
HITACHI NETM*Cm2 Ver04-0x (HI-UX and HP-UX versions, Japan on
HITACHINETM*Cm2Ver05-00(HP-UXandWindowsNTversions,Jap