Filter
Top Products
10 - 12
Beeper - Transmit Order *Before Transmission BEPWHN1 4-2
After Transmission BEPWHN2 4-2
Beeper Pitch - Error (Frequency) *Razz (100 Hz) BEPFQ2100 4-3
Medium (2000 Hz) BEPFQ22000 4-3
High (4200 Hz) BEPFQ24200 4-3
Beeper Duration - Good Read *Normal Beep BEPBIP0 4-3
Short Beep BEPBIP1 4-3
Number of Beeps - Good Read Range 1 - 9 (*1) BEPRPT# 4-3
Number of Beeps - Error Range 1 - 9 (*1) BEPERR# 4-4
LED Settings Red LED Off LEDFN10 4-4
Green LED Off LEDFN20 4-4
Red LED On with Good Scan LEDFN11 4-4
*Green LED On with Good Scan LEDFN21 4-4
Red LED On with Laser LEDFN12 4-4
*Red LED On with Laser/Red LED Blinks
when Battery is Low
LEDFN11026 4-4
Green LED On with Laser LEDFN22 4-4
Red LED On when CodeGate Disabled LEDFN14 4-4
Green LED On when CodeGate Disabled LEDFN24 4-5
LED Settings (continued) Red LED On when In-Stand LEDFN18 4-5
Green LED On when In-Stand LEDFN28 4-5
Red LED On with CTS LEDFN1128 4-5
Green LED On with CTS LEDFN2128 4-5
Red LED when Battery is Low LEDFN11024 4-5
Green LED when Battery is Low LEDFN21024 4-5
LED Brightness Red Off LEDIN10 4-5
Green Off LEDIN20 4-5
Red Low LEDIN11 4-5
Green Low LEDIN21 4-5
Red Medium LEDIN12 4-6
Green Medium LEDIN22 4-6
*Red High LEDIN13 4-6
*Green High LEDIN23 4-6
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page