Filter
Top Products
3 - 16
You may also scan the following Scanner Name bar code and scan up to 30 numbers and/or letters for the scanner name. For
example, if you wanted to name the linked scanner “312,” you would scan the following bar code, scan the 3, 1, and 2 bar codes
on the Programming Chart inside the back cover of this manual, then scan Save. Scan the Reset bar code and wait for the
scanner to relink to the base.
To output the name of the scanner, scan the following bar code. The name will be output showing the product name, model
number, and the scanner’s 10-digit serial number.
Using the Scanner with Bluetooth Devices
The scanner can be used either with the CCB00-010BT charge base or with other Bluetooth devices. Those devices include
personal computers and laptops.
Scanning the following Non-Base BT Connection bar code allows the scanner to be used with other Bluetooth devices (e.g.,
PC/laptop). After you scan the Non-Base BT Connection bar code, follow the instructions supplied with your Bluetooth device
to locate the scanner and connect to it.
Note: If you go out of range with your scanner, the scanner will not reconnect to the Bluetooth device when it is back in range.
0002
0003
0004
0005
0006
0007
Reset
Scanner Name