Filter
Top Products
10 - 18
Straight 2 of 5 IATA Message Length Minimum (1 - 80) *13 A25MIN## 7-13
Maximum (1 - 80) *15 A25MAX## 7-13
Matrix 2 of 5 Default All Matrix 2 of 5
Settings
X25DFT 7-14
*Off X25ENA0 7-14
On X25ENA1 7-14
Matrix 2 of 5 Redundancy Range (0 - 10) *0 X25VOT## 7-14
Matrix 2 of 5 Message Length Minimum (1 - 80) *3 X25MIN## 7-15
Maximum (1 - 80) *80 X25MAX## 7-15
Matrix 2 of 5 Check Char. *No Check Char. X25CK20 7-14
Validate, But Don’t
Tr an s m it
X25CK21 7-14
Validate and Transmit X25CK22 7-14
Code 11 Default All Code 11
Settings
C11DFT 7-15
*Off C11ENA0 7-15
On C11ENA1 7-15
Code 11 Check Digits Required 1 Check Digit Required C11CK20 7-15
*2 Check Digits Required C11CK21 7-15
Auto Select Check Digits Required C11CK22 7-15
Check Digit Validation Validate and Transmit One Check Digit C11CK23 7-16
Validate and Transmit Two Check Digits C11CK24 7-16
Validate and Transmit Auto Select Check
Digits
C11CK25 7-16
Code 11 Redundancy Range (0 - 10) *0 C11VOT## 7-16
Code 11 Message Length Minimum (1 - 80) *3 C11MIN## 7-16
Maximum (1 - 80) *80 C11MAX## 7-16
Code 128 Default All Code 128
Settings
128DFT 7-17
Off 128ENA0 7-17
*On 128ENA1 7-17
128 Group Separator Output *Off 128GSE0 7-17
On 128GSE1 7-17
Code 128 Redundancy Range (0 - 10) *0 128VOT## 7-17
Code 128 Message Length Minimum (1 - 80) *3 128MIN## 7-18
Maximum (1 - 80) *80 128MAX## 7-18
ISBT 128 *Off ISBENA0 7-18
On ISBENA1 7-18
Concatenation Timeout DLYCCT 7-18
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page