Filter
Top Products
Print Server Administration User’s Guide
EtherP Admin Administration
41
Setting up the Print Server for AppleTalk Printing
To set up your print server so that it can be used for AppleTalk printing:
1. Make sure the AppleTalk protocol is enabled. The AppleTalk check box in
the Server Device Configuration window needs to be checked. Select the print
server and choose Server Device... from the Configuration menu to display
this window.
2. Choose AppleTalk Protocol... from the Configuration menu.
3. If your AppleTalk network is divided into AppleTalk zones, you will have to
specify which zone the print server should be in. You should locate the print
server in the same zone as most of the users who will be using it.
If your network is not divided into zones, the AppleTalk Zone field should
contain a single asterisk “
*
”.
4. For each printer port that will be used for AppleTalk printing, you may need to
change the AppleTalk port setttings. Press the appropriate Port Setting button
to open the AppleTalk Port Configuration dialog window.
EtherP Admin will display the port’s Chooser Name (which is the same as the
port name) and allow you to change the port’s settings: