Filter
Top Products
Print Server Administration User’s Guide
EtherP Admin Administration
61
From the Assign Users tab, you can set the print server’s user list. Print server users
are allowed to monitor the print server’s status. (It is not necessary to be a print
server user to print to a queue served by the printer; one need only be a queue user.)
By default on NetWare 3.x servers, the group EVERYONE is included, making it
possible for all users on the file server to view the server’s status.
Resetting the Print Server
Sometimes it may be desirable to restart your network print server, in order to reset
its internal statistics counters or to clear other status information.
There are two different ways to reset the print server:
♦ An ordinary reset has the same effect as powering off the print server and
powering it back on again. Statistics counters will be cleared, but all of the
print server’s configuration settings will be retained.
♦ A factory reset not only restarts the print server, but changes all of its
configuration settings back to their original values, as the print server was
shipped from the factory.
WARNING:
Do not perform a factory reset unless you are absolutely sure this is what you want. All
settings will be erased and replaced with their original values.
To perform the reset:
1. Select Reset or Factory Reset from the Tools menu.