Hypertec Fastprint Multiprotocol Ethernet/Fast Ethernet Print Server Printer User Manual


 
Print Server Administration User’s Guide
73
To perform the download:
1. Make sure you have backup copies of the previous version of the firmware
image files before overwriting them with the new ones.
2. Place the two firmware image files in the root of your TFTP server directory.
(On some versions of the U
NIX
operating system, the TFTP server directory is
found in /tftpboot.)
3. Connect to the print server using
telnet
, and select Tools from the Main Menu.
4. Choose Download Firmware. The print server will display the Download
Firmware menu.
[Download Firmware]
1 - TFTP Server IP Address <0.0.0.0>
2 - Download
0 - Return to Tools Menu
Enter Selection:
5. Choose the TFTP Server IP Address selection. Enter the IP address of the
system you have designated as the TFTP server. For example:
Input TFTP Server IP Address: 203.69.140.234
6. Choose the Download selection. Provided all files are set up correctly, the
print server will download the
.DWL
file, reset itself (closing the
telnet
connection), and begin downloading the .BIN file. When this is complete, the
print server will restart, using the updated version of the firmware.
WARNING:
When downloading the image file, be very careful not to interrupt the transfer by
powering down the print server or disconnecting it from the network. The print server
should be able to recover from an interrupted transfer in most cases, provided the TFTP
server remains available. However, in some situations it may be necessary to return your
print server for servicing in order to recover from an interrupted download.
Index
AppleTalk zone, 72
ARP (address resolution protocol), 114
arp command, 114
authentication trap, 78
banner, NetWare print job, 38
baud rate
port, 18
BIN file, 108, 128
bindery, 42
bindery emulation, 43
bindery emulation mode, 21
BOOTP (Boot Protocol), 113
BSD/OS, 81
CAPTURE command, 21, 37, 54
options, 38
carriage return/linefeed translation, 80
Communication Retries, 96
Communication Timeout, 96
community name, 78
Configuration menu
AppleTalk Protocol..., 72
NetBEUI Protocol..., 56
NetWare Configuration, 47
NetWare Protocol..., 25, 28, 39, 48
Save Configuration, 15, 19, 27, 47, 49, 73, 77
Server Device..., 13, 14, 17, 72, 76
TCP/IP Protocol..., 77, 78, 79
Configure AppleTalk button, 92