Filter
Top Products
Maintenance 55
MAINTENANCE
Croma24 Service Manual
Alignments/Adjustments
The ENCAD Croma24 printers are designed with a minimum of
maintenance requirements in mind. Most of the adjustments are
controlled and performed via software/firmware interaction that
require you to run a subroutine and enter values on the computer.
Programmed calibrations include: color calibration, deadband
alignment, and X-axis calibration. The mechanical adjustment
requirements include the pinch roller adjustments and the encoder
strip height adjustments. No electrical alignments are required.
Color Calibration
This procedure describes how to check that the cartridges are
properly aligned for color plotting & should be followed each time
the ink cartridges are installed. Figure 3-10 is a representation of
how a color calibration looks when printed.
Figure 3-10. Color Calibration.