Filter
Top Products
Chapter 5 — Configuring General Features
SR60 Scanner Programmer’s Reference Manual 141
Configuring the Low Power Shutdown Delay
This feature allows for quick successive reads in the Low Power
mode. Low Power Shutdown Delay is the amount of delay after
the trigger is released before the scanner transitions into shut-
down. The following bar codes provide for transition times of 0
(no delay), 2, 5, or 10 seconds delay.
For other Low Power Shutdown Delay settings, contact Intermec
Product Support.
To set the Low Power Shutdown Delay option
1 Scan the SET bar code.
2 Scan the bar code for the delay.
3 Scan the END bar code.
Enable Step #2 ---------
Disable Step #1 ---------
Disable Step #2 ---------
END ------------------------------------------
SET ------------------------------------------