Filter
Top Products
Chapter 2 — Configuring Interface Settings
SR60 Scanner Programmer’s Reference Manual 31
PC Keyboard Interface Selection
The SR60 scanner supports a variety of PC keyboard interfaces.
Find your PC Keyboard Interface in the first column and note
the corresponding Interface Type in the second column.
For your convenience, the third column lists the corresponding
cable or cables you can use to connect the SR60 scanner.
Scan the following bar codes to select the interface type you
identified from the previous table, “
PC Keyboard Interfaces and
Cables Supported.”
PC Keyboard Interfaces and Cables Supported
PC Keyboard Interface
Interface
Type
Cable(s)
PC/XT with alternate key encoding A P/N 321-635-001
AT, PS/2 25-286, 30-286, 50, 50Z,
60, 70, 80, 90, and 95 with alternate
key encoding
B P/N 321-635-001
P/N 321-636-001
PS/2 25 and 30 with alternate key
encoding
C P/N 321-635-001
P/N 321-636-001
PC/XT with standard key encoding D P/N 321-635-001
AT, PS/2 25-286, 30-286, 50, 50Z,
60, 70, 80, 90, and 95 with standard
key encoding
E P/N 321-635-001
P/N 321-636-001
PS/2 25 and 30 with standard key
encoding
F P/N 321-635-001
P/N 321-636-001
PS/55 5530T with 104 keyboard I P/N 321-635-001
P/N 321-636-001
Intermec recommends that you disconnect power before
plugging or unplugging cables to avoid any possibility of
equipment damage.