Filter
Top Products
Chapter 4 — Enabling and Configuring Symbologies
SR60 Scanner Programmer’s Reference Manual 67
• The Enable Code 128 bar code on page 69 selects Code 128
as an active symbology. The scanner is preset to recognize all
Code 128 bar codes that have between 1 and 50 characters.
• The Enable UCC/EAN 128 bar code on page 69 chooses
EAN 128 as an active symbology. The Automatic
Identification Manufacturers, Inc. of the United States (AIM
U.S.A.) have standardized the reporting of data sources from
bar code reading devices. Sending the AIM symbology prefix
identifies the symbology to the host terminal, allowing it to
specifically differentiate between UCC/EAN-128 (Code 128
with Function Character 1 in the first position) and standard
Code 128 symbols. When this feature is disabled, the host
cannot differentiate between these symbols.
• The Enable Interleaved 2 of 5 bar code on page 69 selects
Interleaved 2 of 5 as an active symbology. Allows change of
check digit or label format (fixed or variable length) options.
• The Enable Codabar bar code on page 69 selects Codabar as
an active symbology. Allows selection of check digit, start/
stop character and format, or label format (fixed or variable
length) options.
•The Enable UPC-A bar code on page 69 enables UPC-A as
an active symbology. If you enable this symbology, additional
options for symbology expansion and reading add-ons are
available.
• The Enable UPC-E bar code on page 69 tells the scanner to
recognize UPC-E as an active symbology. Like UPC-A, UPC-
E offers options for symbology expansion and reading of add-
ons.
• The Enable EAN-13 bar code on page 70 selects EAN-13 as
an active symbology. EAN-13 options are similar to those of
the EAN-8 symbology.
• The Enable EAN-8 bar code on page 70 selects EAN-8 as an
active symbology. EAN-8 symbology selection also allows
options for symbology expansion and reading of add-ons.
• The Enable Code 93 bar code on page 70 enables Code 93 as
an active symbology. The scanner is preset to recognize all
Code 93 bar codes that have between 1 and 50 characters.