Filter
Top Products
Chapter 2 — Configuring Interface Settings
SR60 Scanner Programmer’s Reference Manual 27
To disable either CTS/RTS Control or XON/XOFF Control
1 Disable both CTS/RTS Flow Control and XON/XOFF
Control.
2 Enable one handshaking feature:
• To enable CTS/RTS Flow Control, see page 24.
• To enable XON/XOFF Control, see page 26.
RS-232 ACK/NAK Options
Scan the following bar codes to configure the RS-232 ACK/NAK
parameters for your scanner.
Step #2 ---------
END ------------------------------------------
RS-232 ACK/NAK Options
SET -------------------------------------------
Disable ACK/NAK ---------