Filter
Top Products
Chapter 2 — Configuring Interface Settings
24 SR60 Scanner Programmer’s Reference Manual
CTS Scan Control Illustration
Handshaking controls are mutually exclusive. You cannot enable
more than one of these features at a time, because enabling
multiple controls produces unpredictable results.
Label 1 Label 2Label 1
CTS
Data
Assert
Will not scan again
until toggled
De-assert
Disabled until
Note: Each handshaking feature requires a series of bar codes in
the sequence given. That is, you must enter Programming mode
by scanning the SET bar code, scan the Step #1 bar code, scan the
Step #2 bar code, and then scan the END bar code.
Enable CTS/RTS Flow Control
SET -------------------------------------------
Step #1 ---------
Step #2 ---------