Filter
Top Products
Chapter 2 — Configuring Interface Settings
42 SR60 Scanner Programmer’s Reference Manual
USB Interface
Scan the following bar codes to enable the USB interface and
configure the keyboard country code.
To enable the USB interface and configure the keyboard country code
1 Identify the keyboard country code you will use. See the
“Keyboard Country Code for USB Interface” table on
page 43.
2 Scan the START bar code on page 43.
3 Scan the Enable USB and Configure Keyboard Country
Code bar code.
4 Using the Digits bar codes on page 44, scan the digits to set
the keyboard country code you identified in Step 1.
5 Scan the END bar code on page 43.
200 Milliseconds ---------
500 Milliseconds ---------
1 Second ---------
END ------------------------------------------