Filter
Top Products
Chapter 5 — Configuring General Features
142 SR60 Scanner Programmer’s Reference Manual
Configuring the Half-Angle
When enabled, the Half-Angle feature causes the scanner to scan
with a scan angle that is approximately half the standard setting.
Disabling the feature returns the scanner to the standard scan
width.
To set the Half Angle options
1 Scan the SET bar code.
2 Scan the Enable bar code to enable half angle, or scan the
Disable bar code to disable half angle.
0 Seconds (No Delay) ---------
2 Seconds ---------
5 Seconds ---------
10 Seconds ---------
END ------------------------------------------