Filter
Top Products
Chapter 1 — Introduction to Programming the SR60 Scanner
SR60 Scanner Programmer’s Reference Manual 11
Trouble Scanning the Bar Codes in This Manual
If you are having trouble scanning the bar codes in this manual,
make sure you follow these guidelines:
• Review the scanning instructions in the SR60 Scanner Quick
Start Guide (P/N 930-141-001) which shipped with the
scanner.
• Hold the SR60 scanner at least 1.2 m (4 ft) from the bar code
because this is a long range scanner.
• If you see more than one red marker beam, aim the center
beam on the bar code.
• Move the marker beam horizontally across the page toward
the bar code to avoid passing the marker beam over other bar
codes.