Juniper Networks J6350 Network Router User Manual


 
Figure 71: Set Up Quick Configuration Page
Before you configure the router, gather the information described in Before You
Begin on page 136.
To configure basic settings with J-Web Quick Configuration:
1.
If you have not already done so, connect a management device to the ge-0/0/0
interface on port 0/0. For instructions, see Connecting to the J-Web
Interface on page 137.
2. If the Set Up Quick Configuration page is not displayed, select
Configuration>Quick Configuration >Set Up.
3. Enter information into the Set Up Quick Configuration page, as described in
Table 61 on page 145.
4. Click one of the following buttons:
To apply the configuration and stay in the Set Up Quick Configuration page,
click Apply.
To apply the configuration and return to the Quick Configuration page, click
OK.
144 Configuring Basic Settings with J-Web Quick Configuration
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide