Juniper Networks J6350 Network Router User Manual


 
3. To verify that Web access is enabled correctly, connect to the router using one
of the following methods:
For HTTP accessIn your Web browser, type http://URL or http://IP address.
For HTTPS accessIn your Web browser, type https://URL or https://IP
address.
For SSL JUNOScript accessA JUNOScript client such as JUNOScope is
required. For information about how to log in to JUNOScope, see the
JUNOScope Software User Guide.
4. To verify the secure Web access configuration, see Verifying Secure Web
Access on page 159.
Table 65: Secure Access Quick Configuration Summary
Your ActionFunctionField
Certificates
To add a certificate:
1.
Click Add. Opens the Add a Local Certificate page.
2.
Type a name in the Certificate Name boxfor
example, new.
3.
Paste the generated certificate and RSA private
key in the Certificate box.
To delete a certificate, select it and click Delete.
Displays digital certificates required for SSL
access to the Services Router.
Allows you to add and delete SSL
certificates.
For information about how to generate an
SSL certificate, see Generating SSL
Certificates on page 155.
Certificates
HTTP Web Access
To enable HTTP access, select the Enable HTTP access
check box.
Enables HTTP access on interfaces.Enable HTTP Access
To enable HTTP access on all interfaces, select the
Enable HTTP on All Interfaces check box.
Enables HTTP access on all interfaces at
one time.
Enable HTTP on All
Interfaces
Select and deselect interfaces by clicking the direction
arrows:
To enable HTTP access on an interface, add the
interface to the HTTP Interfaces list.
To disable HTTP access on an interface, add the
interface to the Logical Interfaces list.
Specifies interfaces on which you want to
enable HTTP access.
HTTP-Enabled
Interfaces
HTTPS Web Access
To enable HTTPS access, select the Enable HTTPS
access check box.
Enables HTTPS access on interfaces.Enable HTTPS Access
To specify the HTTPS certificate, select a certificate
from the HTTPS Certificate listfor example, new.
Specifies SSL certificates to be used for
encryption.
This field is available only after you have
created an SSL certificate.
HTTPS Certificate
Configuring Secure Web Access 157
Chapter 8: Configuring Secure Web Access