Juniper Networks J6350 Network Router User Manual


 
Figure 72: Quick Configuration Secure Access Page
To configure Web access settings in the J-Web interface:
1. Enter information into the Secure Access Quick Configuration page, as described
in Table 65 on page 157.
2. Click one of the following buttons:
To apply the configuration and stay on the Quick Configuration page, click
Apply.
To apply the configuration and return to the Quick Configuration page, click
OK.
To cancel your entries and return to the Quick Configuration page, click
Cancel.
156 Configuring Secure Web Access
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide