Filter
Top Products
HJT Model 100 User's Guide 6-1
6.0 System Specifications
NOTE: HJT Model 100 Projector specifications are subject to change without notice.
Image Quality
Brightness
1500 ANSI Lumens.
Contrast Ratio
200:1 Sequential. 150:1 ANSI.
RGB Bandwidth
120 Mhz (measured at -3 db point).
Aspect Ratio
4:3 - 16:9 (variable).
Uniformity
1.5:1 center to edge - ANSI points.
3:1 center to corner.
Graphics Resolution
2000 (H) x 1500 (V).
Video Resolution
1500 TV line (4:3).
Video Response Time
• 16.7 ms.
Color Coordinates
SMPTE 240M.
Input Compatibility
Horizontal Scan Frequency
30-135 kHz.
Vertical Scan Frequency
50-150 Hzs.
Blanking
• 2.3 µs (H) • 500 µs (V).
Source Compatibility
2730 (H) x 2048 (V).
Parameter Storage
99 Channels/20 Sources.
Decoder (optional)
Optional PAL/SECAM/NTSC (3.58/4.43) with line doubler.
Inputs
RGB Input Cards (VIC)
75 ohm BNC input for R,G,B,H,V.
Signal Level
.5-1.2V p-p /Offset: ±3VDC(0.7V Nominal).
Sync Level
.3-4V p-p, Composite Sync(H), separate H&V, or Sync on
Green(G) / Offset: ±3VDC.
Decoder Video Input Card
(Optional)
75 ohm BNC inputs for Composite and Y/C.
Video Level
1V p-p with Sync / Offset:±3 VDC.
S-Video Y Level
1V p-p with Sync / Offset: ±3 VDC.
C Level
300mV p-p / Offset: ±3 VDC.
Switching Time Between
Sources
• 2 Sec.
Control Ports
Terminal
2 full RS-232 inputs for ANSI Terminal, tethered remote, External
Video Switcher or Serial External Communications Protocol with
DATA spec up to 19.2k BAUD.
Tethered IR Remote
Input connection for remote control or IR Repeater.
IR Remote
Front and rear receivers.