JVC CB100 Projector User Manual


 
Chapter 4Setup Adjustments
4-8 Hughes-JVC Technology Corporation
MAIN
SOURCES CH 14 (HDTV)
# Name H (kHz) V (Hz) I
1PC 81.1 60 I
2 VGA 31.5 72.0
3 SVGA1 44.5 72.4
4 SVGA2 56.6 60.8
5 HD 33.5 60.2 I
6 PALLD 31.5 50.1 I
7 8514A 34.5 61.1 I
8
VIC 2.1 33.5+ 60.2+ I
Figure 4.0-2 Sources Menu
4.1.3. Factory-Preset Channels and Sources
Some channels have factory-preset source files, which the operator can
select one (1) of for faster setup. These preset source files should be
checked for proper timing, geometry, and convergence and readjusted, if
necessary. The following table indicates the factory-preset sources
attached to Channel 1:
Table 4.0-2 Channel 1 Factory Preset Sources
Channel 1 Factory
Preset Sources
31.5 kHz
48 kHz
64 kHz
81.1 kHz
NOTE: Any adjustments to the attached source will also alter the data
from the original factory source file. To use a factory-preset source file
and keep it intact for future use, copy it to another source number. Refer
to Section 4.10 on page 4-38 for Backing up Settings procedures.
Indicates channel
highlighted on the
C
HANNELS
list (CH 14).
Also shows the source in
brackets if this highlighted
channel is also active
(on screen).
If the highlighted channel
indicated here is not the
active channel,
the source is blank
.
Pointer shows active source
for the channel, provided
it is visible on screen.
Pointer is a tilde (~) if source
is an approximate match.
Highlights show valid
sources for the active channel
(CH 14).