Filter
Top Products
Chapter 3—Operation
3-20 Hughes-JVC Technology Corporation
# MAIN MENU Description
# Sub-Menu
Description
7. S
YSTEM
Displays the System menu and its six submenus as shown below:
4C
OMM
S
ETUP
Menu selection for type of device for port A/B and baud speed.
The defaults for Port A are ANSI Terminal and 9600 Baud.
The defaults for Port B are N
ONE
and 9600 Baud.
If a Video Switcher is being used, it must be selected for either
Port A or B from the Comm. Setup menu. Select a speed of 9600
Baud for Port A or 19200 for Port B.
NOTE: Video Switchers and the Tethered Remote option should
be connected to Port B. This allows for Boot Manager to use an
ANSI Terminal on Port A to upgrade software without the need
for reconfiguring.
5F
ACTORY
A
DJUSTMENTS
1
ILA
®
B
IAS
Red, green, and blue ILA
®
light valve
bias adjustment. Must be done
whenever light valve components are
replaced or ILA
®
Sensitivity is changed.
2
ILA
®
S
ENSITIVITY
Value adjustment for light valve bias
frequency.
3 CRT F
OCUS
Value adjustment for R, G, or B CRT
focus.
4 H/V D
YNAMIC
F
OCUS
Value adjustment for horizontal and
vertical dynamic focus.
6M
AINT
. U
TILITIES
Provides a submenu below for maintenance purposes:
1S
TATUS
Displays projector parameters such as;
software revision, VIC types, channel
information, lamp hours, projector
(system controller) hours.
2D
ISPLAY
S
YSTEM
E
RROR
L
OG
Display screen for system errors.
3R
ESET
S
YSTEM
E
RROR
L
OG
Dialog to confirm reset.
4E
XPORT
C
ONFIGURATION
Dialog for saving the projector’s setup
data to an external host for backup.
This backup data can be imported
whenever a System Controller board is
replaced.
5I
MPORT
C
ONFIGURATION
Used with #4 E
XPORT
C
ONFIGURATION
above.
6R
ESET
L
AMP
T
IMER
Dialog to change timer value.