Filter
Top Products
2-8 A-61092 September 1999
Adjusting the exit
hopper side guides
and end stop
The exit hopper side guides and end stop must be adjusted so
documents are stacked properly after processing.
1. Adjust the side guides on the exit hopper to match the adjustment
of the side guides on the feed shelf.
Side
guides
(arrows
depict correct
placement of
side
g
uides
)
End
stop
Exit hopper
Exit hopper
label
2. Adjust the end stop of the exit hopper by determining the longest
document to be processed. Slide the end stop until the arrows point
to where the length of the longest document is shown on the exit
hopper label.
17-inch with
adapter (A3)
14-inch (B3)
ArrowArrow
11-inch (A4)
8 ½-inch (A5)
5-inch
IBM cards
Checks